FRP Pipe/FRP Tank/Filament Winding Machine/Electrolytic Cell/FRP GratingMachine/FRP Pultrusion Machine
FRP (fiberglass reinforced plastic) pipe is a new kind of pipe material used for fluid transportation in recent years. Because of its excellent properties, it has been used extensively on the market. The reciprocal filament winding process has the advantages of high strength, reasonable jointing type, convenient installation, speedy test of the leakage test to the joint, it mainly be used for buried pipeline and long-distance transfer pipeline.
The pipe is consisted of inner liner, interface, structural layer, and outer surface layer.
Inner liner is corrosive resistance layer, Surfaces exposed to the chemical environment shall be resin-rich and reinforced with a 10 or 20 mil thick chemical surfacing mat (E- glass).
Interface layer is leakage proof layer, it be reinforced by minimum of three layers of 1.5 oz chopped strand mat.
Structural layer will be reinforced by continuous strand fiberglass roving and shall maintain a resin content of 20-40%. It is reinforcement for the inner lining layer and interface, resisting the foreign load to the pipe body and ensures the strength and stiffness of the pipe body.
Exterior surface shall consist of a chopped strand glass over which a resin-rich coating shall be applied.
Inspection and test of FRP pipes shall be peroformed according to ASTM D2996, AWWA C950, ANSI etc.
1. Diameter:DN25-4,000mm;
2. Work Pressure Class:0.6MPa~2.5MPa;
3. Normal Stiffiness:SN1,2500, SN5,000,SN10,000.
4. Standard: ISO14001:2004,ISO19001:2008, OHSAS 18001:2007, etc.
Features for frp grp pipe
1. Low weight, high stiffness and good fatigue resistance
2. High strength and high hydraulic characteristic
3. Good corrosion resistance and long service life, more than 50 years
4. Easy connection and installation and saving cost
5. Superior anti-aging and anti-freeze
6. Good insulation performance
7. Smooth internal surface , low friction coefficient and high delivery efficiency.
Applications
1. Water supply (cross country transmission and distribution) - municipal, industrial and agricultural
2. Waste-water / Sewerage collection - domestic and industrial
3. Drainage
4. Irrigation
5. Storm water
6. Sea water intake/outfalls - circulating cooling water for power and petrochemical industries
7. Penstocks - hydroelectric power generation
8. Firefighting
9. Slip lining - sewer renewal and structural reinforcement for pressure pipes
FRP GRP GRP Pipe
1. Light weight, high strength, and convenient transportation and installation.
2. Excellent corrosion resistant, it can be used under the condition of seawater environment for long time.
3. Good low temperature resistant, it can be used under the condition of -45°C-120°C for long time.
4. Smooth inner surface, its roughness coefficient is 0.0084, good conveying, and no fouling, no secondary pollution, decrease the cost of the running & maintenance.
5. Fire retardant, it meets IMOA.753(18) Level-3 fire resistance class.