Glass fiber reinforced plastic pipes are also known as glass fiber wound sand pipes (RPM pipes). It mainly uses glass fiber and its products as reinforcing materials, polymer-based unsaturated polyester resins, epoxy resins, etc. as basic materials, and inorganic non-metal particulate materials such as quartz sand and calcium carbonate as fillers as main raw materials. The standard effective lengths of the tube are 6m and 12m. There are three methods for making the tube: fixed-length winding process, centrifugal casting process and continuous winding process. Can be classified according to the product's process method, pressure level PN and stiffness level SN.
The advantages of FRP pipes are as follows:
1. Good corrosion resistance. As the main raw material of FRP is composed of unsaturated polyester resin and glass fiber with high polymer content, it can effectively resist the corrosion of acid, alkali, salt and other media and untreated domestic sewage, corrosive soil, chemical wastewater and many chemical liquid Erosion, under normal circumstances, can maintain the safe operation of the pipeline for a long time.
2. Good aging resistance and heat resistance. FRP can be used for a long time in the temperature range of -40 ° C to 70 ° C. The specially formulated high temperature resistant resin can also work normally at temperatures above 200 ° C. For long-term use in open-air pipes, ultraviolet absorbers are added to the outer surface of the pipes to eliminate the radiation of ultraviolet rays to the pipes and delay the aging of FRP pipes.
3. Good frost resistance. Below minus 20 ° C, freeze cracking will not occur after freezing inside the tube.
4. Light weight, high strength and convenient transportation. FRP pipe is not only light in weight, high in strength, strong in plasticity, easy to transport and install, but also easy to install various branch pipes, and the installation technology is simple.
5. Good hydraulic conditions. The inner wall is smooth, the transportation capacity is strong, no scaling, no rust, and small water resistance.
Specifications of FRP Pipe
Diameter: DN15-4000mm
Pressure grade: 0.1MPa, 0.6MPa, 1.0MPa, 1.6MPa, 2.0MPa, 2.5MPa Stiffness grade: SN1250, SN2500, SN5000, SN10000
Application of FRP pipe
1. Chemical medium conveying pipe
2. Various craft halls (chemical process, papermaking process, sewage treatment process, seawater desalination process, food and beverage processing process, pharmaceutical process, etc.)
3. Pressure water pipes of small hydropower stations on the ground, circulating water pipes of power plants
4. Sewage collection and transmission pipeline
5. Drinking water mains and distribution pipes
6. Oilfield water injection pipe and crude oil delivery pipe
7. Thermal energy pipeline, seawater pipeline
8. Agricultural machinery irrigation pipe
9. Vacuum tube, external pressure tube and siphon tube
Production line